Enterprise Lighting and Control - Eastern Wisconsin

Template Details
nLight distributed (wired)

Want to convert these products into a project?

Click the below button and one of our sales associates will assist you.

Contact Enterprise Lighting and Control - Eastern Wisconsin
Application Examples
Views:

A
 
Pending
Image Name Description Manufacturer Qty Part Number Notes

ENVEX™

 ENVEX™ is a high-performance recessed ambient series designed to meet intense specification requirements with ease. The timeless design allows ENVEX to enrich any space without distracting from the beauty of the architecture. Offering a wide range of lumen packages, color temperatures, and lighting controls options to meet specifications with ease, ENVEX is available in both Static White and Tunable White, delivering up to 7200 lumens at a color quality of up to 90CRI. ENVEX is available in three designs including the new Blade Louver and all offering volumetric distribution. Each fully-luminous design is visually comfortable for occupants, making ENVEX a perfect solution for commercial spaces where occupant efficiency is key such as schools, offices, and healthcare. ENVEX™ is compatible with the DC2DC architecture Lithonia Lighting 0 -- --
Backbone
 
Pending
Image Name Description Manufacturer Qty Part Number Notes

NECY System Controller

 The nLight ECLYPSE™ system controller connects an nLight lighting network to an IP network, supporting remote connectivity, time-based management, integration with building management, integration with demand response, and more. nLight 0 -- --
Network
 
Pending
Image Name Description Manufacturer Qty Part Number Notes

nBRG 8

 The nLight 8-Port Bridge increases the number of lighting control zones in an nLight system. This ability stems from the fact that each Bridge has 8 RJ-45 ports into which zones of daisy-chained nLight-enabled devices can connect. The Bridge also is an integral component of the communication backbone in an nLight network. Fundamentally, Bridges act as hubs by aggregating traffic from the connected downstream zones and placing it onto the backbone. They also act as routers by forwarding information from the backbone out to the applicable downstream zones. The Bridge's actual backbone link is formed by connecting to another Bridge or a Gateway via CAT-5 cabling through one of its RJ 45 ports. Finally, Bridges can combine system power from zones that are net contributors of power (i.e. those with downstream power packs and power supplies) and distribute it to zones that are net consumers of power (i.e. those with only sensors). Maximum power output per port is 40mA.Communicates w/ nLight Network Remotely Upgradeable Push-Button Programmable Green LED Indicators for each Port Supports up to 128 Devices per Port nLight 0 -- --
PP
 
Pending
Image Name Description Manufacturer Qty Part Number Notes

nPP16 Family

 The nLight nPP16 Series power pack is the workhorse of an nLight system. Each unit has two important responsibilities: providing system power and switching lighting loads. To provide system power, the power pack transforms Class 1 line voltage (120/277 VAC or 347 VAC) to Class 2 15 VDC. For switching a lighting load, an internal 16A latching relay is used. The power packs two RJ 45 connectors make control wiring with standard CAT-5 cabling easy and clean. For simplifying installation, power packs have an elongated chase nipple that allows them to be attached either directly through a 1/2" knockout into a junction box, or inside an adjacent box for meeting specific local code requirements in ceiling plenums.Communicates w/ nLight Network Remotely Configurable/Upgradeable Push-Button Programmable Configurable Relay Logic Provides System Power Self-Contained Relay Switches Line Voltage Load Plenum Rated Green LED Indicator Extended Chase Nipple nLight 0 -- --
PP-EM
 
Pending
Image Name Description Manufacturer Qty Part Number Notes

nPP16 ER

 OverviewThe nLight nPP16 ER Series relay pack is used to switch luminaires powered via an emergency circuit. Ideal for use along side a standard nPP16 relay pack that controls a zone's normal powered lighting, the nPP16 ER is designed to switch up to 16 Amps of lighting load. The nPP16 ER's two RJ-45 connectors make control wiring with standard CAT-5 cabling easy and clean. An elongated chase nipple facilitates attachment directly to a junction box or fixture through a 1/2 inch~157; knockout. A push button and LEDs are also provided which allow users the ability to manually alter settings or test emergency operation.Automatically Overrides Emergency Lights On Upon Normal Power Loss Communicates w/ nLight Network Remotely Configurable/Upgradeable Self-Contained Relay Switches Emergency Lighting Load Measures & Reports Current through Relay Test/Programming Button Green LED Indicator Extended Chase Nipple nLight 0 -- --
SENSOR
 
Pending
Image Name Description Manufacturer Qty Part Number Notes

nCM xx RJB Family

 The nCM xx RJB family of nLight ceiling/surface mount occupancy sensors provide a range of networked sensor solutions for applications with finished ceilings (e.g. ceiling tiles, sheetrock, plaster). nCM xx RJB family sensors utilize 100% digital Passive Infrared (PIR) detection and are available with several lens options, providing flexibility for multiple mounting height and coverage pattern requirements. Dual technology occupancy detection can also be added as an option for applications where occupants are stationary for long periods of time. All sensors have integrated on/off photocells as a standard feature, with automatic daylight harvesting/dimming control as an available option. Additionally, nCM xx RJB family sensors are also available with an optional auxiliary low voltage relay for simple integration with a BMS system or other building system. These sensors are powered via the nLight network bus and typically communicate with one or more nLight enabled luminaires (e.g. Lithonia VTLED Series) or nLight relay/dimming packs to enable control of fixtures individually or in groups. These configurations work standalone and do not require a connection to a larger nLight network. Ceiling Mount Daylight Harvesting PhotocellThe nCM ADCX RJB and nCM PC RJB photocell sensors are ceiling/surface mount devices that provide a range of daylight harvesting features for nLight Control System installations with finished ceilings (e.g. ceiling tiles, sheetrock, plaster). The nCM PC RJB version provides on/off photocell control by default, while the nCM ADCX RJB provides automatic dimming photocell control by default. Ideal for spaces with windows, such as vestibules, corridors, classrooms, or offices, these sensors work by first monitoring daylight conditions in a room. They then signal networked nLight control devices to adjust their dimming outputs (and/or turn lighting off) to obtain maximum energy savings while ensuring adequate lighting levels are maintained. nLight 0 -- --
WS
 
Pending
Image Name Description Manufacturer Qty Part Number Notes

nPODM Family

 The nPODM Series WallPods are nLight-enabled toggle and/or dimming switches that provide a user with local control of a lighting zone. These single gang decorator style devices have soft-click buttons and have a green LED indicator for each button. WallPods communicate with other nLight devices via a CAT-5 cable that connects to one of its two RJ-45 connectors. A basic low voltage WallPod can work with an nLight power pack or line voltage sensor to provide toggle switch operation. WallPods with the DX dimming option have the added ability to adjust the level of any nLight controlled dimmable lighting. For push-button scene control, see the nPODM 1S/2S/4S Series WallPods.Communicates w/ nLight Network Remotely Configurable/Upgradeable Traditional Tactile Feel Green LED per Button 1,2, or 4 Channel On/Off 1 or 2 Channel Dimming Control nLight 0 -- --
© 2025 The Lighting Exchange - Powered by Your Lighting Brand